Criss Cut Moissanite: The X Pattern, Its Fire and What to Check – DovEggs-Seattle
Skip to content

Criss Cut Moissanite: How to Read the X Before You Choose One

A criss cut moissanite is faceted so that rows of concentric step facets are crossed by diagonal facets, and from above an X seems to run through the middle of the stone. The steps keep the clean, straight lines of a step cut. The crossing facets break those lines into a woven, crosshatched sparkle.

A name on a listing tells you very little on its own. The X tells you much more: whether this is the pattern you saw, how the stone carries moissanite's fire, and whether a particular stone was cut cleanly. So look at the X, not the name.

What a criss cut looks like

Face-up, the cut shows two layers of lines. Rows of step facets follow the outline inward like nested frames, and diagonal facets cut across those rows and meet in an X over the center. Between the steps, the crossing lines give the surface its woven look.

Criss cut moissanite close up showing the crossing facets meeting in an X

In moissanite listings, criss cut describes that facet pattern rather than one outline, and other sellers use it on cushion and emerald shapes. Ours looks like a rectangle with cut corners, a little longer than it is wide. The photo on our loose stone listing is captioned "concentric step and cross-shaped facets," and that is what you see from above.

Next to emerald, radiant and asscher

Cut Facet style What you see face-up
Emerald Parallel steps, cut corners A few broad, calm flashes, often called a hall of mirrors
Radiant Brilliant facets in the same cut-corner outline Busy, crushed-ice sparkle
Asscher Steps on a near-square, cut corners An X traced by the corners of the square steps
Criss cut Steps crossed by diagonal facets, cut corners An X made by crossing facets, woven between the steps

The asscher is the easiest of the three to confuse with it, because both show an X. In an asscher the X follows the corners of the steps. In a criss cut, separate facets cut across the steps themselves. If a square stone is what caught your eye, a classic square step cut tends to read calmer.

A criss cut is not a criss cross ring

Criss cross describes a ring's band, not its stone. The band crosses over itself, and the center stone can be any shape: round, pear, oval. Criss cut describes how the center stone is faceted.

So a ring can have one, the other, or both. When a listing says criss cross, look at the band. When it says criss cut, look at the stone.

How the criss cross pattern shows moissanite's fire

Moissanite is silicon carbide, its own gemstone and not a diamond, with a dispersion of 0.104 against a diamond's 0.044. Dispersion is a property of the material, so no cut adds or removes it; the cut only decides how that fire reaches your eye.

A plain step cut tends to show a few broad on-off flashes. Brilliant facets in the same rectangle break light into busy, crushed-ice sparkle. The crisscross pattern usually reads between the two. Its crossing facets cut the long step flashes into shorter ones along the X, and on moissanite, many of those shorter flashes often show color. When a seller promises more fire from this cut, read it as more visible flashes, not more dispersion.

In our Twilight Blue criss cut, we see the blue shift between shades as the light moves. Before you pick a shade, read how colored moissanite gets its color.

Twilight Blue criss cut moissanite ring showing color and the X pattern

Our criss cut moissanite, and the colors we cut it in

What we like most about our criss cut is that we do not keep it near-colorless. We cut the same X pattern in color. Alongside near-colorless stones, you can have it in Twilight Blue (our own blue) and in Stardust Grey, Peacock Blue, Champagne and sapphire-blue tones, so the pattern and the color stay two separate choices.

Stardust grey criss cut moissanite stone

The rest is plain fact. DovEggs cuts this pattern in moissanite, in one outline: the cut-corner rectangle. The criss cut loose moissanite is listed in sizes from 1 to 5 carats, and our criss cut moissanite rings come in six designs, five of which offer center stones from 1 to 5 carats. On those ring listings, a 1 carat center measures 5 by 7 mm, a 2 carat measures 6 by 8 mm, and a 4 carat measures 8 by 10 mm. DovEggs moissanite stones come with a lifetime warranty.

Colors, sizes and stock change, so treat the listings, not this page, as the current word on what is available.

What to check before you buy a criss cut

Three checks tell you more than the name or a facet count. We do not publish a facet count for ours; the X is something you can judge yourself.

Watch the X move

Ask for video, not one photo. A still image catches one moment of light; on video you can see the short flashes travel along the X. The DovEggs loose stone listing includes one filmed under indoor lighting.

Then look at the X itself. The four arms should meet near the middle of the stone, and the lines should look sharp. A lopsided X is easy to spot once you look for it. Treat this as a shopper's check, not a grading rule, since we know of no grading standard for this cut.

Read it face-up and in millimeters

Moissanite is doubly refractive. It is usually cut so the doubling stays hidden when you look straight down through the top, but at an angle, facet edges can look doubled under magnification, and long straight step lines can make that easier to see. We have no evidence either way on whether the crossing facets hide it, so look at the stone the way you will wear it: face-up first, then tilted on video.

Compare length and width, not only carats. Carat is a weight; millimeters are what your hand actually shows.

Look at the corners

The cut corners are where the outline meets the setting, so look at how each design holds them. On our solitaire the prongs sit on the corners, and on our bezel pave ring the metal follows them. Moissanite rates 9.25 on the Mohs scale, a measure of scratch resistance, not a promise against chips.

Criss cut moissanite ring showing how the setting holds the cut corners

Pairing the X with a setting and a color

If you want the X to read first, keep metal out of its way. A solitaire or a ring with small side stones leaves the whole face open. A bezel draws metal around the outline, which tends to make the rectangle look crisper and the X a little quieter. A halo adds a ring of small accent stones, and their busier sparkle around a calmer center becomes part of the look.

Color sets the mood. Near-colorless shows the crossing lines most clearly. A colored stone, whether Twilight Blue, Stardust Grey, Peacock Blue, Champagne or a sapphire-blue tone, puts the color first and the pattern second, which suits you if the shade is what drew you in. Because we cut the X in each of these, the color and the setting stay separate choices.

Choose the setting for how much of the X you want to see, then the color for how you want it to feel.

Previous Article Next Article

Availability